Alienware Area-51 m5550 User Manual download pdf (Page 59)

Alienware Area-51 m5550 Technical Reference

6. Push the HDD module to the right and separate it from the connector. Lift

the module away from the bay.

7. Locate and remove 4 Screw C’s from the HDD module. Remove the metal case.

8. Re-attach the metal cover to the new hard drive and tighten 4 Screw C’s.

Note the green PC board of the hard disk drive is facing against the

metal case.

9. Re-attach the HDD module to the HDD connector and re-attach 1 Screw B.

10. Put the HDD cover back and re-attach 2 Screw A’s.

Congratulations! You have now completed the hard drive upgrade. When you boot up

the PC, you may need to create a primary HDD partition, reformat the new drive and

re-install the O/S, drivers, and all the necessary applications.

m5550-04-2007-techref.indd 59 4/6/2007 12:29:51 PM

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

No comments

Alienware Area-51 m5550 User Manual Page 59